Maintenance Method for Hydraulic System of Mechanical Band Sawing Machine
2023-05-25
Author:
Views:
Most of the horizontal band sawing machines, adjustable view point sawing machines, vertical band sawing machines, CNC band sawing machines, gantry band sawing machines, shear band sawing machines, small band sawing machines, and other series of sawing machines produced use closed oil tanks with filters installed at their entrances. During the application process, it is necessary to prevent the invasion of moisture, emulsion, dust, fiber debris, and other mechanical debris. The oil level of the hydraulic oil tank should be maintained within the designated oil level plan after the pipelines and components of the saw system are filled with oil. The hydraulic system of the band saw machine must undergo rigorous cleaning before being put into use. Strict filtration is necessary when refueling. The oil filter of the band saw machine must be checked frequently, and once it is contaminated, it should be replaced immediately to check the quality of the hydraulic oil as scheduled. The technical department reminds customers that in order for your band saw machine to operate normally, it is necessary to pay attention to the following three issues in its hydraulic system:
1、 Degree of oxidation of hydraulic oil in band saw machines
If the hydraulic oil of the band saw machine has a black brown color and a foul odor, it indicates that it has already been oxidized. The darker the brown color, the stronger the foul odor, and the more severe the oxidation. In this case, a new oil should be replaced. The servo azimuth control module of the sawing machine system adopts a combination of sampling interpolation and preview control for azimuth control. Due to electromagnetic mechanical hysteresis and motion inertia, it is simply impossible to control the feeding slide to move 0.1mm through "on" and "off" control.
2、 Moisture Content of Hydraulic Oil for Band Sawing Machine
If the hydraulic oil of the sawing machine is milky white and the odor does not change, it indicates that there is too much water mixed in. Take a small amount of hydraulic oil and drop it onto the hot iron plate. If a "beep" sound is announced, it indicates that it is rich in water and should be replaced with new oil immediately.
3、 Impurity content in hydraulic oil of band saw machine
Take a few drops of hydraulic oil from the saw machine mailbox and place them in your hand. Twist them with your fingers. If there are many metal particles or flash points, it indicates that the hydraulic oil is rich in mechanical impurities. Sedimentation on 42 # hydraulic oil must be carried out, and then filtered before use. Replace hydraulic oil immediately. After stopping the machine, operate the operating equipment to place it in a high position, close the engine, use hydraulic oil to self weight, and drain oil to clean the oil tank and pipelines when the hydraulic oil is hot. Please inject new oil.
HOTLINE
086-713-3953 123
Mobile website